Nice T-01C3 module. Tested in Arduino environment IDE 1.8.19, ESP32 package 2.0.2, board selected "ESP32C3 Dev Module". The module is pin compatible with ESP01 (based on ESP8266) and can be used on the same adapter for flashing/debugging code. But the GPIOs available on the connector are not the same between the 2 modules and a small adaptation is mandatory when porting software from ESP01 to T-01C3 GPIO 8,9 and 2 are available on the connector ( One more than on the ESP01) A green LED is on GPIO 3(it is on GPIO 2 on the ESP01) and It seems that GPIO 2 can't be used as output (TX) with the HardwareSerial library (jQuery111304962499406939068_1642168743121) This module seems more tolerant concerning the power supply than the ESP01/8266 Tested with an application involving web server, GPS, file system etc … Nice module, with a very small footprint. Perfect when the size is important. But others ESP32-C3 modules with USB interface and more GPIOs maybe better for development/evaluation and easier to use

Nice T-01C3 module. Tested in Arduino environment IDE 1.8.19, ESP32 package 2.0.2, board selected "ESP32C3 Dev Module". The module is pin compatible with ESP01 (based on ESP8266) and can be used on the same adapter for flashing/debugging code. But the GPIOs available on the connector are not the same between the 2 modules and a small adaptation is mandatory when porting software from ESP01 to T-01C3 GPIO 8,9 and 2 are available on the connector ( One more than on the ESP01) A green LED is on GPIO 3(it is on GPIO 2 on the ESP01) and It seems that GPIO 2 can't be used as output (TX) with the HardwareSerial library (jQuery111304962499406939068_1642168743121) This module seems more tolerant concerning the power supply than the ESP01/8266 Tested with an application involving web server, GPS, file system etc … Nice module, with a very small footprint. Perfect when the size is important. But others ESP32-C3 modules with USB interface and more GPIOs maybe better for development/evaluation and easier to use

Nice T-01C3 module. Tested in Arduino environment IDE 1.8.19, ESP32 package 2.0.2, board selected "ESP32C3 Dev Module". The module is pin compatible with ESP01 (based on ESP8266) and can be used on the same adapter for flashing/debugging code. But the GPIOs available on the connector are not the same between the 2 modules and a small adaptation is mandatory when porting software from ESP01 to T-01C3 GPIO 8,9 and 2 are available on the connector ( One more than on the ESP01) A green LED is on GPIO 3(it is on GPIO 2 on the ESP01) and It seems that GPIO 2 can't be used as output (TX) with the HardwareSerial library (jQuery111304962499406939068_1642168743121) This module seems more tolerant concerning the power supply than the ESP01/8266 Tested with an application involving web server, GPS, file system etc … Nice module, with a very small footprint. Perfect when the size is important. But others ESP32-C3 modules with USB interface and more GPIOs maybe better for development/evaluation and easier to use

Well packaged and excellent delivery time (11 calendar days from order). This is a good option for when you don't need so many GPIOs. It's very compact end easy to incorporate into ant project.

Well packaged and excellent delivery time (11 calendar days from order). This is a good option for when you don't need so many GPIOs. It's very compact end easy to incorporate into ant project.

Well packaged and excellent delivery time (11 calendar days from order). This is a good option for when you don't need so many GPIOs. It's very compact end easy to incorporate into ant project.

Arrived nicely packed. Haven't tested yet but all boards from LILYGO has been good so far.

Arrived nicely packed. Haven't tested yet but all boards from LILYGO has been good so far.

Arrived nicely packed. Haven't tested yet but all boards from LILYGO has been good so far.

Perfektné

Perfektné

Perfektné

TOP !!!

TOP !!!

TOP !!!

Very pleased with the product, it is easy to use and works well. It is not pin compatible with the ESP-01S because the UART that is broken out to the pins is UART0, and on the C3 UART1 is used for the AT commands while UART0 is used for programming the device. This makes the device very easy to program, but not usable as a plugin replacement for the ESP-01S for simple AT command use cases. Unfortunately in my use case, the device is not suitable, however, it still works well and I will have other uses.

Very pleased with the product, it is easy to use and works well. It is not pin compatible with the ESP-01S because the UART that is broken out to the pins is UART0, and on the C3 UART1 is used for the AT commands while UART0 is used for programming the device. This makes the device very easy to program, but not usable as a plugin replacement for the ESP-01S for simple AT command use cases. Unfortunately in my use case, the device is not suitable, however, it still works well and I will have other uses.

Very pleased with the product, it is easy to use and works well. It is not pin compatible with the ESP-01S because the UART that is broken out to the pins is UART0, and on the C3 UART1 is used for the AT commands while UART0 is used for programming the device. This makes the device very easy to program, but not usable as a plugin replacement for the ESP-01S for simple AT command use cases. Unfortunately in my use case, the device is not suitable, however, it still works well and I will have other uses.

Great product.

Great product.

Great product.

ok

ok

ok

Working fine with ESP8266 Downloader Serielles WIFI-Modul ESP-01

Working fine with ESP8266 Downloader Serielles WIFI-Modul ESP-01

Working fine with ESP8266 Downloader Serielles WIFI-Modul ESP-01

Better than ESP-01 in everything, and even one additional gpio pin!

Better than ESP-01 in everything, and even one additional gpio pin!

Better than ESP-01 in everything, and even one additional gpio pin!